Analogue Output Module 4AQ

The Siemens 6ES7332-5HD01-0AB0 is an analogue output module from the SIMATIC S7-300 product family, specifically designed for industrial automation. This module provides four optically isolated analogue outputs, supporting both voltage and current signals, and features robust diagnostics for reliable system operation.

• Outputs: 4 analogue outputs (U/I)

• Signal Types: Voltage (0–10 V, 1–5 V, ±10 V) and current (0–20 mA, ±20 mA, 4–20 mA)

• Resolution: 11/12 bits (depending on output range)

• Isolation: Optically isolated from the backplane bus and load voltage

• Diagnostics: Programmable diagnostics and diagnostic alarms

• Supply Voltage: 24 V DC (load voltage L+), with reverse polarity protection

• Current Consumption: Max. 240 mA from load voltage, max. 60 mA from backplane bus (5 V DC)

• Power Loss: Typical 3 W

• Short-Circuit Protection: Yes, for voltage outputs (up to 25 mA)

• Current Output No-Load Voltage: Max. 18 V

• Load Impedance:

  • Voltage outputs: min. 1 kΩ, max. capacitive load 1 µF

  • Current outputs: max. 500 Ω, max. Inductive load 10 mH

• Cable Length: Up to 200 m (shielded)

• Conversion Time: 0.8 ms per channel

• Accuracy:

  • Voltage: ±0.4% at 25°C (basic error), ±0.5% across temperature range

  • Current: ±0.5% at 25°C (basic error), ±0.6% across temperature range

• Dimensions: 40 x 125 x 117 mm (W x H x D)

• Weight: Approx. 220 g

• Installation: Hot-swappable (removing and inserting possible with active backplane bus)